Dynamic Structures of DNA Heptamers with Different Central Trinucleotide Sequences Studied by Electrochemical and Spectral Methods

A short, single‐stranded DNA fragment d(GCGAAGC) and its analogs d(GCNNNGC) carrying different trinucleotide sequences in the center of the molecule (AAA,CCC, GGG or TTT) were investigated by spectral (CD and UV spectra) and electrochemical methods (voltammetry, polyacrylamide gel electrophoresis). Our results show that (i) the central triplet GAA or AAA dramatically stabilizes DNA hairpins, (ii) a stem‐loop configuration is not supported by CCC or TTT sequences, instead, these heptamers adopt bimolecular duplex forms. Finally (iii), in the case of GGG sequence a very stable supramolecular G‐quadruplex is formed.     

Molecular beam study of CO chemisorption on alumina-supported Pd particles

The adsorption of carbon monoxide on small alumina-supported Pd particles and on a Pd(111) single crystal has been studied with a molecular beam techniques. The measured sticking coefficient shows that CO adsorbs on palladium surface according to precursor states. It is noted that a temperature dependent diffusion of gas molecules on the support influences the sticking probability of CO.     

Evidence for the two-body nature of theE1 transition operator in the sdf-interacting boson model

Two new absolute transition rates are reported for the nucleus¹⁴⁴Sm following an (α, α′) Coulomb excitation study. They are B(E3; 3^?→ 0⁺)=(38±3) W.u. and B(E1;3^? → 2⁺)=(2.8±0.4)×10^?3 W.u. This large E1 matrix element, along with the previously known B(E1; 1^? →⁺) value support the interpretation of the 1^? state in this nucleus as 2-phonon 2⁺ × 3^? excitation. In the frame of the IBM-1 +f-boson model we show the need for a two-body term in the E1 transition operator. Estimates for the strengths of the one and two-body parts of the E1 transition operator are obtained from these experimental data.     

Design of molecular imprinted polymers compatible with aqueous environment

The main problem of poor water compatibility of molecularly imprinted polymers (MIPs) was addressed in examples describing design of synthetic receptors with high affinity for drugs of abuse. An extensive potentiometric titration of 10 popular functional monomers and corresponding imprinted and Blank polymers was conducted in order to evaluate the subtleties of functional groups ionisation under aqueous conditions. It was found that polymers prepared using 2-trifluoromethacrylic acid (TFMAA) in combination with toluene as porogen possess superior properties which make them suitable for effective template recognition in water. The potential impact of phase separation during polymerisation on formation of high quality imprints has been discussed. Three drugs of abuse such as cocaine, deoxyephedrine and methadone were used as template models in polymer preparation for the practical validation of obtained results. The polymer testing showed that synthesized molecularly imprinted polymers have high affinity and selectivity for corresponding templates in aqueous environment, with imprinting factors of 2.6 for cocaine and 1.4 for methadone and deoxyephedrine. Corresponding Blank polymers were unable to differentiate between analytes, suggesting that imprinting phenomenon was responsible for the recognition properties.     

Stability constants of amino acids, peptides, proteins, and other biomolecules determined by CE and related methods: recapitulation of published data

The stability (affinity, association, binding, complexation, formation) constant characterizes binding interaction between the analyte and the complexing agent. Knowledge of the stability constant makes possible the prediction and estimation of the binding behavior of constituents (amino acids, peptides, proteins, drugs, antibiotics, enzymes, enantiomers) to their partners, and the finding of a suitable partner for the given analyte to form a stable complex. The present paper summarizes the stability constant determination methods and the approaches used to evaluate the experimental data. Further, the paper recapitulates the published stability constant values determined, mainly, by capillary electrophoretic methods, taken from the Web of Science database covering the last decade. Details of the experimental conditions employed for the determination of the stability constants are also given. The review attempts to give a critical evaluation of the problems that accompany the determination of stability constant and discusses their solution.     

Hydrogenation of coumarin to octahydrocoumarin over a Ru/C catalyst

The production of octahydrocoumarin, which can serve as a replacement for toxic coumarin, was investigated using 5% Ru on active carbon (Ru/C) as the catalyst for the hydrogenation of couma-rin. The hydrogenation was studied by optimizing the reaction conditions (pressure, solvent and coumarin concentration). The activity and selectivity of the Ru/C catalyst were compared for dif-ferent solvents. The mechanism of coumarin hydrogenation was deduced. The formation of side products was explained. The optimal hydrogenation reaction conditions were: 130 °C, 10 MPa, 60 wt% coumarin in methanol, and 0.5 wt% (based on coumarin) of Ru/C catalyst. At the complete conversion of coumarin, the selectivity to the desired product was 90%.     

From Dibismuthenes to Three‐ and Two‐Coordinated Bismuthinidenes by Fine Ligand Tuning: Evidence for Aromatic BiC3N Rings through a Combined Experimental and Theoretical Study

The reduction of N,C,N‐chelated bismuth chlorides [C₆H₃‐2,6‐(CH?NR)₂]BiCl₂ [where R=tBu ( 1 ), 2′,6′‐Me₂C₆H₃ ( 2 ), or 4′‐Me₂NC₆H₄ ( 3 )] or N,C‐chelated analogues [C₆H₂‐2‐(CH?N‐2′,6′‐iPr₂C₆H₃)‐4,6‐(tBu)₂]BiCl₂ ( 4 ) and [C₆H₂‐2‐(CH₂NEt₂)‐4,6‐(tBu)₂]BiCl₂ ( 5 ) is reported. Reduction of compounds 1 – 3 gave monomeric N,C,N‐chelated bismuthinidenes [C₆H₃‐2,6‐(CH?NR)₂]Bi [where R=tBu ( 6 ), 2′,6′‐Me₂C₆H₃ ( 7 ) or 4′‐Me₂NC₆H₄ ( 8 )]. Similarly, the reduction of 4 led to the isolation of the compound [C₆H₂‐2‐(CH?N‐2′,6′‐iPr₂C₆H₃)‐4,6‐(tBu)₂]Bi ( 9 ) as an unprecedented two‐coordinated bismuthinidene that has been structurally characterized. In contrast, the dibismuthene {[C₆H₂‐2‐(CH₂NEt₂)‐4,6‐(tBu)₂]Bi}₂ ( 10 ) was obtained by the reduction of 5 . Compounds 6 – 10 were characterized by using ¹H and ¹³C NMR spectroscopy and their structures, except for 7 , were determined with the help of single‐crystal X‐ray diffraction analysis. It is clear that the structure of the reduced products (bismuthinidene versus dibismuthene) is ligand‐dependent and particularly influenced by the strength of the N→Bi intramolecular interaction(s). Therefore, a theoretical survey describing the bonding situation in the studied compounds and related bismuth(I) systems is included. Importantly, we found that the C₃NBi chelating ring in the two‐coordinated bismuthinidene 9 exhibits significant aromatic character by delocalization of the bismuth lone pair.     

On families of quadrature formulas based on Euler identities

A family consisting of quadrature formulas which are exact for all polynomials of order ?5 is studied. Changing the coefficients, a second family of quadrature formulas, with the degree of exactness higher than that of the formulas from the first family, is produced. These formulas contain values of the first derivative at the end points of the interval and are sometimes called “corrected”.     

Determination of 28 selected elements in textiles by axially viewed inductively coupled plasma optical emission spectrometry

A simple, robust and reliable analytical procedure for the determination of 28 selected elements, namely Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Hg, Mg, Mn, Mo, Na, Ni, Pb, Sc, Si, Se, Sn, Sm, Sr, Tl, V, and Zn in textile materials by inductively coupled plasma optical emission spectrometry (ICP-OES) after microwave digestion of samples was optimized and validated in this work. The total amount of elements present in textile samples was determined after microwave digestion of materials in 7 mol/L nitric acid within the optimal working program: 5 min at 150 °C (power 250 W), 15 min 180 °C (300 W) and 20 min at the maximum temperature of 200 °C (350 W). For the quality control reasons, which were ascertained by analysis of the certified cotton trace elements reference material IAEA-V9, the ICP-OES method was optimized through several parameters: by comparing Meinhard and Gemcone Low Flow nebulizers efficiency, ranging nebulizer gas flows from 0.6 to 1.0 L/min, ranging sample flows from 0.8 to 1.2 mL/min, testing RF power from 1200 to 1400 W, detecting data acquisition time (read time) from 0 to 527 s, ranging washing (delay) time from 0 to 408 s, as well as by checking the occurring interferences for the optimal line selection. Validation included determination of linearity, selectivity, accuracy, reproducibility, precision and limits of detection calculated for all 28 selected elements of interest. The developed analytical procedure was successfully applied on textile fibers (cotton, flax and hemp) as well as on standard knitted textile sample materials (cotton and wool).     

Determination of engineered nanoparticles on textiles and in textile wastewaters

Textile materials with engineered nanoparticles (ENPs) have excellent properties as they are antibacterial, antimicrobial, water resistant and protective. The textile industry has recognized the importance and the advantages of ENPs, so they comprise one of the fastest developing branches of processing.The most important sources of ENPs released to the environment from textiles are textile-industry wastewaters and waters from large hospital or hotel laundries. In addition, waste textile materials coated with ENPs present a threat to the environment, if such materials are not properly handled and disposed of after use.Currently, the toxicity and the potential harm of ENPs widely applied on textiles are not thoroughly investigated and/or eliminated. Consequently, there is an urgent need to define the most appropriate analytical methods for monitoring ENPs on textiles.This review presents the most important techniques for monitoring ENPs on textile materials and in textile-wastewater samples, from the perspective of protecting the environment and human health.